All Posts
RE:Feb 3rd - Breakfast anyone??? |
||
---|---|---|
Senior Guru
Joined:
2005/9/9 0:00 From Philly Suburbs
Posts:
180
|
We are meeting at Ridley at 8:30 then driving to breakfast. Probably get there about 9:30 - 9:45.
Posted on: 2008/2/2 1:01
|
|
Transfer |
RE:Not The First Or The Last Stupid Question ... |
||
---|---|---|
Senior Guru
Joined:
2007/12/28 0:00 From Palm Beach Gardens, FL
Posts:
439
|
Quote:
That's why I like to flush the area well. Battery boogers will break down in water and rinse away, hopefully out the bottom and onto the ground. Does baking soda neutralize the acid? I used to clean my rusty chrome wheels with Coke and a Brillo pad when i was a kid.Worked like a charm. On batteries it would be an acid on acid application. What do our chemical engineers have to say about this? This out of practice Chemical Engineer says use baking soda. Baking soda is a base. Mixing a base with an acid produces water and a salt. Hence the need to rinse with fresh water. Coke contains phosphoric acid. It is a good cleaner, but still leaves you with a corrosive acid.
Posted on: 2008/2/2 0:59
|
|
_________________
96 CE Roadster LT4 |
||
Transfer |
Five years ago today, a day of mixed emotions for me |
||
---|---|---|
Elite Guru
Joined:
2005/9/17 0:00 From Downbound train, NC
Posts:
2184
|
After a few days of the usual negotiating, I finally got the deal I wanted and had just left the car lot driving my first Corvette, the '95 coupe that I'm still glad to own. It was a cool but sunny morning here in NC and obviously I was on top of the world. That's when it came on the radio. The Columbia's data and communication had suddenly stopped and the worst was feared. And as we know, the worst indeed had occurred.
Please join me in remembering and paying tribute to these six American and one Israeli heroes on this day. Rick D. Husband William C. McCool Michael P. Anderson David M. Brown Kalpana Chawla Laurel Blair Salton Clark Ilan Ramon We know they are all with God and at peace.
Posted on: 2008/2/2 0:53
|
|
Transfer |
RE:Anyone ever heard of a siezed/spun cam bearing? |
||
---|---|---|
Elite Guru
Joined:
2005/9/16 0:00 Posts:
1524
|
Wow a simple project gone awry....
Hope it turns out better than it started..
Posted on: 2008/2/2 0:49
|
|
Transfer |
Not The First Or The Last Stupid Question ... |
||
---|---|---|
Elite Guru
Joined:
2005/9/16 0:00 Posts:
1524
|
Good! Cause I was beginning to think I might be out of a job......
Posted on: 2008/2/2 0:44
|
|
Transfer |
RE:Will a stopped up cat kill a car? |
||
---|---|---|
Elite Guru
Joined:
2005/9/16 0:00 Posts:
1524
|
I had a neighbor cat piss on my pedals before.
Though it didn't kill the car, it sure did stink! :tongue:
Posted on: 2008/2/2 0:38
|
|
Transfer |
RE:First post for a newbie |
||
---|---|---|
Guru Newb
Joined:
2008/1/27 0:00 From Georgia
Posts:
23
|
Welcome ,nice hot rod
Posted on: 2008/2/2 0:14
|
|
Transfer |
Re: Will a stopped up cat kill a car? |
||
---|---|---|
Senior Guru
Joined:
2005/9/16 0:00 From Palm Beach Gardens, FL
Posts:
515
|
Quote:
For those of you who know my plight, car has been in the shop for a while now, started off as ignition module, fixed that, then high voltage something or another, pointed to a wiring/opti problem, now car still in shop, idles for two whole hours and doesn't die. But, now it will start, run very rich, black smoke out right side, then die and sometimes won't even run at all. We are all confused and am wondering if a stopped up cat could very well be the problem? Car has 223K miles on it.... I think it would be easier for people here to help you if you updated your original thread rather than start a new one as the story continues to unfold. As I mentioned in previous threads, there were no references in the FSM to the DTC codes that you had previously mentioned. Also, the DTC codes I could find in the FSM that had anything to do with high voltage had nothing to do with the Opti. I'm no expert but from what you've mentioned so far, I don't think the shop that's working on your Corvette knows what's going on...
Posted on: 2008/2/2 0:08
|
|
_________________
John 1996 LT4 coupe black/black 160 Tstat, K&N, Hypertech PPIII (for the fans), CAGS, Nitto 555 EPs, 275/315s, Chrome A-molds, a little tint and some black-outs AIRFOIL FREE! |
||
Transfer |
constipated cat |
||
---|---|---|
Senior Guru
Joined:
2007/12/19 0:00 From somerset, ky
Posts:
154
|
Had a cat stop up on my 93, the exhaust was cherry red from the manifold to the cat, car would start, idle for a few minutes and then start to miss. If i hadnt raised the hood after dark i wouldnt have known what it was.
Posted on: 2008/2/2 0:08
|
|
Transfer |
RE:Who Remembers When Pron ...... |
||
---|---|---|
Elite Guru
Joined:
2005/9/17 0:00 From Downbound train, NC
Posts:
2184
|
Quote:
. Realigned for a target audience. As in "teh pron." And yes when I was a kid, those racy little magazines that some of the kid's parents tried to hide from us, often had the black strips over the eyes of those fallen women. It kind of added a special little extra element of naughtiness! :thumbleft: Give me Your dirty love Just like those tacky little pamphlets in your daddy's bedroom drawer Give me Your dirty love I don't believe you never seen those books before I don't need your cheap aroma, Or your Little Bo Peep diploma, Just let me put you in a coma with some dirty love. from "Dirty Love" by Frank Zappa
Posted on: 2008/2/2 0:07
|
|
Transfer |
RE:Who Remembers When Pron ...... |
||
---|---|---|
Chair-man of the bored
Joined:
2007/12/10 0:00 From Homestead USA
Posts:
33760
|
Back in the late 60's and early 70's I used to wash big rigs. Sometimes when we cleaned out the cabs we found black and white photo magazines with women in compromising positions. Some apparent whacked out law required the eyes to be blacked out with a bar so you supposedly couldn't identify the poser. Just bringing up a blast from the past for some to remember and get a chuckle. And yes , like the A/C D/C album cover.
Posted on: 2008/2/2 0:07
|
|
Transfer |
RE:Who Remembers When Pron ...... |
||
---|---|---|
Guru Newb
Joined:
2008/1/27 0:00 From Georgia
Posts:
23
|
Like the cover on AC/DC's Dirty Deeds album,or did I miss something..
Posted on: 2008/2/1 23:58
|
|
Transfer |
RE:your views on Royal purple synthetic oil please ?? |
||
---|---|---|
Elite Guru
Joined:
2005/9/17 0:00 From Downbound train, NC
Posts:
2184
|
Quote:
here is a fun website. www.bobistheoilguy.com Exactly what I was going to post. You'll get nearly as many opinions as replies to a question like this. This is the definitive source for scientific info, testing and etc. re/ automotive lubricants. Although it has nothing to do with your question and I have no experience with their motor oils, I've used their racing synthetic power steering oil in my Vette for several years now. No problems, no leaks and it cured the "cold morning rack" stiffness issue. Original rack with 125K miles on it.
Posted on: 2008/2/1 23:54
|
|
Transfer |
RE:hydraulic roller cam install /product questions |
||
---|---|---|
Senior Guru
Joined:
2007/12/28 0:00 From Palm Beach Gardens, FL
Posts:
439
|
I remember the 8 throttle body saga from the other forum. They have arrived.
Posted on: 2008/2/1 23:52
|
|
_________________
96 CE Roadster LT4 |
||
Transfer |
RE:Who Remembers When Pron ...... |
||
---|---|---|
Chair-man of the bored
Joined:
2007/12/10 0:00 From Homestead USA
Posts:
33760
|
Pron really sounds like horn but with a p. Realigned for a target audience.
...............................
Posted on: 2008/2/1 23:48
|
|
Transfer |
RE:your views on Royal purple synthetic oil please ?? |
||
---|---|---|
Senior Guru
Joined:
2007/12/28 0:00 From Palm Beach Gardens, FL
Posts:
439
|
My 86 would do a puff of smoke on startup. Valve stem seals. Has nothing to do with the oil. It did not use oil. I've used Mobil 1 in every vehicle I have owned for 25 years without one hint of a problem.
YMMV!
Posted on: 2008/2/1 23:43
|
|
_________________
96 CE Roadster LT4 |
||
Transfer |
RE:Will a stopped up cat kill a car? |
||
---|---|---|
Elite Guru
Joined:
2005/9/17 0:00 From Downbound train, NC
Posts:
2184
|
Quote:
I thought you were talking about a constipated cat I would think when the cat got so constipated that it couldn't see, it would indeed stop the car. And go take a laxative or something..... Has anyone read codes on this car? A restricted cat can certainly cause performance problems but it doesn't explain the apparent rich condition on the right bank. Are you confident this shop knows what they're doing or are they just throwing parts at it?
Posted on: 2008/2/1 23:43
|
|
Transfer |
RE:Super Bowl Sunday |
||
---|---|---|
Senior Guru
Joined:
2007/12/3 0:00 From robesonia , pa
Posts:
516
|
Giants for me And remember the Pats were caught cheating 1st game was it ? and now their undefeated hummm
Posted on: 2008/2/1 23:39
|
|
Transfer |
RE:Will a stopped up cat kill a car? |
||
---|---|---|
On Sabbatical
Joined:
2006/7/6 0:00 From Augusta, GA (85 383 stroker)
Posts:
3213
|
Hmm, I would think that it could but there are better experts out there that can chime in with a healthy answer for you. BTY when I first read your title I thought you were talking about a constipated cat
Posted on: 2008/2/1 23:38
|
|
Transfer |
RE:HAIER 42 in plasma troubles |
||
---|---|---|
Master Guru
Joined:
2007/4/3 0:00 From Jonesboro, AR
Posts:
4652
|
Although I do agree with you, this set is only 15 months old or so, and already out and fwiw, I don't watch a lot of tv to begin with. So my price per day is quite high. Still, a set should last WAAAAAYYYYY longer than this. I've researched online and have found this to be a very common problem with my particular model......
Waiting on call from service center 4th day now....
Posted on: 2008/2/1 23:36
|
|
Transfer |
Will a stopped up cat kill a car? |
||
---|---|---|
Master Guru
Joined:
2007/4/3 0:00 From Jonesboro, AR
Posts:
4652
|
For those of you who know my plight, car has been in the shop for a while now, started off as ignition module, fixed that, then high voltage something or another, pointed to a wiring/opti problem, now car still in shop, idles for two whole hours and doesn't die. But, now it will start, run very rich, black smoke out right side, then die and sometimes won't even run at all. We are all confused and am wondering if a stopped up cat could very well be the problem? Car has 223K miles on it....
Posted on: 2008/2/1 23:33
|
|
Transfer |
RE:Super Bowl Sunday |
||
---|---|---|
Elite Guru
Joined:
2005/9/17 0:00 From Downbound train, NC
Posts:
2184
|
I'm only watching for the half-time commercials. But GO GIANTS!
Posted on: 2008/2/1 23:03
|
|
_________________
I hate sporks... |
||
Transfer |
RE:First post for a newbie |
||
---|---|---|
Elite Guru
Joined:
2005/9/17 0:00 From Downbound train, NC
Posts:
2184
|
Welcome to the place for C4s!
Posted on: 2008/2/1 23:00
|
|
_________________
I hate sporks... |
||
Transfer |
RE:So clarify for me..... |
||
---|---|---|
Elite Guru
Joined:
2005/9/17 0:00 From Downbound train, NC
Posts:
2184
|
Quote:
We in International are considering annexing National for its arable land, In the famous words of my hero, Bugs Bunny, "Eh you know of course, this means war."
Posted on: 2008/2/1 22:54
|
|
Transfer |
RE:Not The First Or The Last Stupid Question ... |
||
---|---|---|
Senior Guru
Joined:
2007/12/30 0:00 From Tyrone, PA
Posts:
1260
|
Quote:
I rough them up a little with a wire brush, then rinse away the crap. Next, I add a dab of vasoline to the male and female ends, mate them, tighten them up and I'm good to go. He wasn't asking about your love life.....
Posted on: 2008/2/1 22:40
|
|
_________________
´89 Vert, 383, 230/236 cam, AFR 195's, LT Headers, HSR intake, 2800 stall, Zex 200 shot, ET Street Radials, tune by me. Runs were with D36 3.07's. On spray, 10.55 @ 132.78, 1.55 60 ft. On motor, 12.08 @ 113.15, 1.66 60 ft. |
||
Transfer |
RE:your views on Royal purple synthetic oil please ?? |
||
---|---|---|
Guru Newb
Joined:
2007/12/30 0:00 From Texas
Posts:
157
|
Quote:
I had an 86 L98 with 75000 miles that used Mobil 1 exclusively. When I tore it down to upgrade, it showed no wear and not a hint of a ridge in the cylinders. I asked this question because the guy I bought my C-4 from owned it since new and said he always used Moble 1 since new and it smokes on start. I had a BMW I ran 15 years on Moble 1 and the valve train was junk after 13800 miles. However when I bought it new that was the estimate the dealer gave me on the engine life. Seems I have seen lots of old Chevys go 200,00 miles on regular oil. I guess I will run moble 1 when I install my new engine if no one else has a problem.
Posted on: 2008/2/1 22:07
|
|
Transfer |
RE:84-87 Hood Support Struts Dimensions? |
||
---|---|---|
Senior Guru
Joined:
2008/1/15 0:00 From Bremen/Germany
Posts:
369
|
Good info guys, thanks a lot.
My buddy just asked me, to go ahead and to order those from RockAuto. I always thought, the earlier hoods would weigh more because of their structural design, guess not.
Posted on: 2008/2/1 22:06
|
|
_________________
91 convertible |
||
Transfer |
RE:Question regarding coilovers on the street |
||
---|---|---|
Senior Guru
Joined:
2007/12/30 0:00 From Boston, MA for the most part :)
Posts:
7763
|
Check this out...
[url]http://www.c4guru.com/modules.php?name=Forums&file=posting&mode=quote&p=17344[/url] quote="ghoffman" We are addressing both the upper front and lower rear debate. The upper front mount distributes the load over a greater surface area so that the lilkelyhood of cracking is all but eliminated. The lower rear is a different story. We have no idea what the OE stud is actually made of (alloy wise) but assuming it is a decent alloy steel piece, it is marginal for the loads encountered. Tom Urban measured the piece off of his '95 and I modeled it with COSMOS. The load in this model is 2200 lbs and that is just at the elastic limit (yleld). History indicates that it has not been a problem, as C4's have been running around with coil overs for years, and to do 2200 lbs, you basically have to have slam the one side of the car down at 1.5 g's. On the other hand, the other mounts, can take much more than this and argues for a new design for long term fatigue. Comments are welcome as well as sarcastic remarks! Cheers, Gary " Well that's good to find out. Nice to have a real engineering working on this stuff! Look like if you go into coil bind before hitting the bump stops with the current setup, the mount will fail. Sound like time for a new mount.
Posted on: 2008/2/1 22:00
|
|
_________________
Polo Green 95 LT1 6-spd http://mysite.verizon.net/vzevcp74/ 383 LT1/Vortech Supercharger/AFR heads/Rod end suspension/Penske-Hardbar dual rate coilovers/Wilwood 6pot brakes NCCC Governor: http://BayStateCorvetteClub.com |
||
Transfer |
RE:Not The First Or The Last Stupid Question ... |
||
---|---|---|
Guru Newb
Joined:
2007/12/30 0:00 From Texas
Posts:
157
|
Quote:
I also use Coke to clean my teeth, instead of brushing. So I got lots of extra brushes my dentist keeps giving me. After a while the spaces betwwen your teeth will get so large you won't have to floss either.
Posted on: 2008/2/1 21:59
|
|
Transfer |
RE:Opinions on maximum practical HP for the C4 on the street |
||
---|---|---|
Senior Guru
Joined:
2007/12/30 0:00 From Boston, MA for the most part :)
Posts:
7763
|
900 sounds about right
[url]http://www.fastcoolcars.com/callaway_sledgehammer.htm[/url] I should be putting 600 to the tires when I'm done. I'll let you know how it goes :D
Posted on: 2008/2/1 21:56
|
|
_________________
Polo Green 95 LT1 6-spd http://mysite.verizon.net/vzevcp74/ 383 LT1/Vortech Supercharger/AFR heads/Rod end suspension/Penske-Hardbar dual rate coilovers/Wilwood 6pot brakes NCCC Governor: http://BayStateCorvetteClub.com |
||
Transfer |
RE:2/2 SAT Cruise |
||
---|---|---|
Guru Newb
Joined:
2008/1/21 0:00 From Chester County, Pa
Posts:
19
|
Update
We will still meet at Hooters at eleven, and depart around 11:15. Drive down to Port Deposit, Md for lunch. There a a few restaurants and Pubs, we can check out the town and pick a place. Google Port Deposit, Md for info if you like.
Posted on: 2008/2/1 21:33
|
|
Transfer |
RE:C4Guru window decals |
||
---|---|---|
Senior Guru
Joined:
2006/10/17 0:00 From Oxford, Pa
Posts:
127
|
OK with me
Posted on: 2008/2/1 20:57
|
|
_________________
1984 Corvette mostly stock, many new parts |
||
Transfer |
RE:Super Bowl Sunday |
||
---|---|---|
Mega Guru
Joined:
2007/8/31 0:00 From Central PA
Posts:
3644
|
I posted on this topic earlier, but I must have done something wrong....
Anyway, I am not a fan of either team, but my wife thinks Eli is cute. So she is behind NYG. I have this irrational dislike of Bill Belicheck. I am all for casual dress, but this guy looks like a slob, and seems devoid of a personality. I'll probably watch, but don't really care who wins. I don't know much about betting and stuff. Are the Pats highly favored to win?
Posted on: 2008/2/1 20:32
|
|
_________________
Currently "Between Vettes". |
||
Transfer |
RE:Feb 3rd - Breakfast anyone??? |
||
---|---|---|
Mega Guru
Joined:
2007/8/31 0:00 From Central PA
Posts:
3644
|
Dang, you guys!
My wife is bugging me to move back to PA. All of her family and most of mine are there. I'll have to be sure to move close to you'uns guys if I head back that way! Wish I could be there with you for this run. I will be there in spirit!
Posted on: 2008/2/1 20:21
|
|
_________________
Currently "Between Vettes". |
||
Transfer |
RE:Feb 3rd - Breakfast anyone??? |
||
---|---|---|
Guru Newb
Joined:
2008/1/11 0:00 Posts:
3
|
Are we meeting at 9:30 or 10 AM? The CF forum says 10AM. Which is it? I'll be there or I'll call Scott and tell him I won't make it.
Posted on: 2008/2/1 20:18
|
|
_________________
2005 C6, Black, MZ6, Z51 Package, Polished Z06 Wheels, Corsa Extreme, Kooks LT Headers & X-Pipe,Halltech CAI, B&M Shifter, Bilstien Shocks. 388/rwhp and 380/rwtq. Ported Intake,TB & Tune by Jeremy Formato. 2002 Camaro SS (Build Date 9/10/01) Bright Ra |
||
Transfer |
RE:Want to meet some of ya |
||
---|---|---|
Guru
Joined:
2007/12/28 0:00 From Get in mah belly!
Posts:
71
|
Oaklands, I'm just down the road from you. I suspect that I'll go again this year to the cruise in if only to see some old friends. Theres several C4 owners in this area but we are still greatly outnumbered by the C5/6 owners.
Posted on: 2008/2/1 19:35
|
|
_________________
1996 Coupe Hotcam, headers, true duals, 4.10s. 1969 Wife. Stock, special ordered with redhead package and ride control. 2005 Son. Order date Nov27th 2004. Build date Aug 9th 2005 . Stock with blonde hair/blue eyes and hell on wheels package. |
||
Transfer |
RE:Timing Chain ? |
||
---|---|---|
Elite Guru
Joined:
2006/11/27 0:00 From North Carolina
Posts:
1671
|
Because everything breaks and it's annoying. I wanted to do led taillights BUT i need to replace my window motor because the ribbon broke. When I first got the car bearing rod got damaged. My tranny had to be rebuilt, my radiator went out, water pump, windshield wiper springs got damaged(weird), digidash, gas gauge, speedometer, caliper, rim, exaust needed to be replaced so I just upgraded , Distributor, tires, sound system looked like crap cuz of aftermarket, my windshield got smashed in because someone dont like me, serpentine belt wore out, battery and alternator went out, coil, plug wires, plugs fuel pump, ......Either thei njectors, differental, timnig chain,one of them is about to go out and cause all hell to break loose.....I can feel it!! , 30 dollars is cheap.
Oh yea, brake booster and master cylinder went out as well, heats not working, A.C. has a leak, intake manifold gasket was bad, windshield wiper motor,.....I know its old but damn....Need I go any further??? Lately its been parked in my yard sitting....... I think the heater core is clogged, digidash has a bad solder, speedometer piece in the tranny is shot,. I don't want to be a pest and bother you with a timing chain. Gas is REALLY expensive.
Posted on: 2008/2/1 19:27
|
|
Transfer |
RE:Super Bowl Sunday |
||
---|---|---|
Guru
Joined:
2007/11/28 0:00 From Scottsdale, Arizona
Posts:
166
|
Quote:
U guy's all make me sick As U can tell from my name I'm rooting for history I'm with you! Pats in a blow-out.
Posted on: 2008/2/1 19:23
|
|
Transfer |
RE:Who Remembers When Pron ...... |
||
---|---|---|
Guru
Joined:
2007/11/28 0:00 From Scottsdale, Arizona
Posts:
166
|
I don't remember any magazine models in Tron.
Posted on: 2008/2/1 19:21
|
|
Transfer |
RE:Not The First Or The Last Stupid Question ... |
||
---|---|---|
Senior Guru
Joined:
2007/10/28 0:00 From San Diego, CA
Posts:
9454
|
I also use Coke to clean my teeth, instead of brushing. So I got lots of extra brushes my dentist keeps giving me.
:toothy5:
Posted on: 2008/2/1 19:20
|
|
Transfer |
RE:3 years |
||
---|---|---|
Guru
Joined:
2007/11/28 0:00 From Scottsdale, Arizona
Posts:
166
|
Six years this April.
Posted on: 2008/2/1 19:19
|
|
Transfer |
RE:Not The First Or The Last Stupid Question ... |
||
---|---|---|
Chair-man of the bored
Joined:
2007/12/10 0:00 From Homestead USA
Posts:
33760
|
That's why I like to flush the area well. Battery boogers will break down in water and rinse away, hopefully out the bottom and onto the ground. Does baking soda neutralize the acid? I used to clean my rusty chrome wheels with Coke and a Brillo pad when i was a kid.Worked like a charm. On batteries it would be an acid on acid application. What do our chemical engineers have to say about this?
Posted on: 2008/2/1 19:15
|
|
Transfer |
RE:hydraulic roller cam install /product questions |
||
---|---|---|
Guru
Joined:
2007/11/28 0:00 From Scottsdale, Arizona
Posts:
166
|
Emo-vet?
Posted on: 2008/2/1 19:13
|
|
Transfer |
RE:Not The First Or The Last Stupid Question ... |
||
---|---|---|
Senior Guru
Joined:
2007/10/28 0:00 From San Diego, CA
Posts:
9454
|
Has anyone tried using Coke? I heard that dissolves the stuff.
I just brush em off with a brass brush and try to not get the debris anywhere important. The dried battery boogers are probably nasty concentrated stuff.
Posted on: 2008/2/1 19:05
|
|
Transfer |
RE:I hearby declare this section property of Slalom4me |
||
---|---|---|
Senior Guru
Joined:
2007/10/28 0:00 From San Diego, CA
Posts:
9454
|
Can I join? I think I still have some undigested food from Tijuana in my system. Allow me to speak on it's behalf when I say " "
Posted on: 2008/2/1 19:03
|
|
Transfer |
RE:hydraulic roller cam install /product questions |
||
---|---|---|
Senior Guru
Joined:
2008/1/6 0:00 Posts:
312
|
hi josh,
how are ya! thanks for the extra info you pointed out!! yep motor is a 388 c.i.stroker ,forged with ligth weight internals and 8 throttle bodies. i will be using afr ported competition 195 cc heads and most likely 3.90 or 4.10 gears with 6 speed. cams rev range kicks in from 2,200 -6,200 rpm btw. cheers glen
Posted on: 2008/2/1 18:37
|
|
Transfer |
RE:I hearby declare this section property of Slalom4me |
||
---|---|---|
Guru Newb
Joined:
2007/12/30 0:00 From Orange County, NY
Posts:
41
|
Can I be an honorary member of whatever it is you are talking about?
Posted on: 2008/2/1 18:34
|
|
_________________
´87 coupe, 383, ZF 6 Speed, 4.10s |
||
Transfer |
RE:hydraulic roller cam install /product questions |
||
---|---|---|
Guru
Joined:
2008/1/1 0:00 From Raleigh, NC
Posts:
666
|
What displacement are you going with? Greater than 383?
That cam should make great power. In a stock cuber you'd have to rev it pretty high to see the power, and as as the cubes go up the RPM where that cam will make power will start to come down. If you're doing a 383+ with a great flowing set of heads, advancing the cam to try to get more bottom end power out of the engine in kind of creating a contradictory combo. It's like buying heads designed to make power at 5000+ RPM's, and then buying an intake designed to make power from idle to 4500; and hoping that you'll have the best of both worlds. Well, it doesn't work that way. You'll end up with the negatives of both components and the positives of neither. If you are going with more inches, I really doubt you'll need more bottom end power. Usually, the extra displacement really helps the low end torque; and even if the low end isn't satisfactory to you, there's other ways to compensate rather than advancing the cam and creating a mis-matched combo. Gears, converter, and a couple other things can really help create a car that's really fun at low RPM. What kind of power band are you looking for? And what displacement are you going with?
Posted on: 2008/2/1 18:26
|
|
Transfer |
RE:Timing Chain ? |
||
---|---|---|
Guru
Joined:
2008/1/1 0:00 From Raleigh, NC
Posts:
666
|
That's not too bad I guess. About 150 miles down 85.
Let me know if you want to do it and I'll try to schedule a time to come down. I guess you could come here and we could do it my garage, but I'd hate for something to happen and we get stuck for a few days waiting on parts or something. Why do you think you need to replace the timing chain?
Posted on: 2008/2/1 18:18
|
|
Transfer |
RE:UPDATE: Steering Column tilt pin repair |
||
---|---|---|
Elite Guru
Joined:
2005/12/20 0:00 Posts:
1114
|
I found the parts needed, I believe, will confirm later.
Why cant we just dril out the area that keeps getting worn in the support/housing area where the pins go through, and put real good bushings?
Posted on: 2008/2/1 18:12
|
|
_________________
Ko'u ohana aia ku'a ikaika |
||
Transfer |